GRC構件自從引進國內開始便開始大勢蔓延，國內各地都開始形成歐式建筑風，而歐式建設常見的外墻裝飾便是GRC構件和GRC構件，隨著如今又有水泥構件的出現，很多人對裝飾構件的選擇有些迷茫，下面帶大家看看GRC構件的優勢有哪些：
Since the introduction of GRC components into China, they have spread widely, and European architectural styles have begun to form in all parts of the country. The common exterior wall decoration of European construction is GRC components and GRC components. With the emergence of cement components now, many people are confused about the choice of decorative components. Now let's take a look at the advantages of GRC components:
The following editor will introduce the general process of Shandong GRC components from production to installation.
GRC構件的制作流程
Manufacturing process of GRC components
1、在需要固定的地方要預埋鋼筋好是預埋鍍鋅鋼或鐵，鍍鋅鋼或鐵不易生銹!兩頭露外8-9厘米能焊接就好。先把準備好的玻纖布條鋪于鋼筋上，再用料灰覆蓋成一條肋，形成加筋固定帶。
1. The reinforcement shall be embedded in the place where it needs to be fixed. It is better to embed galvanized steel or iron. Galvanized steel or iron is not easy to rust! It is good if the two ends are exposed for 8-9 cm and can be welded. First, lay the prepared glass fiber cloth on the reinforcement, and then cover it with cement to form a rib to form a reinforced fixing belt.
2、正常情況下，一般2-3個小時混泥土可凝固，拆掉模具，即為半成品。
2. Under normal conditions, the concrete can solidify in 2-3 hours, and the mold is removed, which is semi-finished product.
3、將脫下的水泥件放入水池浸水也可以蓋上麻袋草簾澆水7天養護。
3. Put the removed cement parts into the pool for soaking, or cover them with sacks and grass curtains for watering for 7 days.
4、保養好的半成品，有缺陷的地方需要用水泥修補下，后空地上貯存。
4. The defects of the maintained semi-finished products need to be repaired with cement and then stored on the open ground.
GRC構件的安裝流程
Installation process of GRC components
1、基面清理：與GRC構件相連接的墻體基面，不可存在質量缺陷、粘連灰渣和油污等影響安裝質量的雜質。
1. Base surface cleaning: the base surface of the wall connected with GRC components shall be free of quality defects, adhesive ash, oil and other impurities that affect the installation quality.
2、后置預埋件：打鋼筋、固定螺栓，使基面后置預埋件與GRC構件預埋件的連接相適應，確保安裝的穩固性、性和持久性。
2. Post-embedded parts: install reinforcement and fixing bolts to adapt the connection between the post-embedded parts of the base surface and the embedded parts of GRC components to ensure the stability, safety and durability of the installation.
3、安裝位置與固定：平面、高度的放線定位均應符合設計要求;固定端節點連接(焊接/螺接)必須牢固可靠，各組件接頭(焊接/螺接/粘接/插接)必須牢固。
3. Installation position and fixation: the setting out and positioning of plane and height shall meet the design requirements; The fixed end node connection (welding/screw connection) must be firm and reliable, and the component joints (welding/screw connection/bonding/plugging) must be firm.
4、鋼件防腐：焊縫熔熘、安裝毛刺等部位均應做打磨處理，表面達到平滑/圓滑，再進行分層防腐油漆。
4. Anti-corrosion of steel parts: weld flash, installation burr and other parts shall be polished, and the surface shall be smooth/smooth, and then layered anti-corrosion paint shall be applied.
5、填料：填充及封堵均應符合《GRC構件標準圖》及其“深化設計”要求。
5. Filler: filling and plugging shall meet the requirements of GRC Component Standard Drawing and its "Detailed Design".
6、收口封堵：密封材料及封堵做法均應符合設計要求，設計無要求時參照以下方法處理。
6. Closure and sealing: sealing materials and sealing methods shall meet the design requirements. If there is no design requirement, refer to the following methods.
7、觀感質量：花飾/構件的紋路清晰，層次分明,表面光滑，平整;表面應潔凈,接縫應嚴密吻合,不得有歪斜、裂縫、翹曲及損壞。
7. Appearance quality: the pattern of flower decoration/component is clear, with clear layers, smooth and flat surface; The surface shall be clean, and the joints shall be closely matched without deflection, crack, warpage and damage.
GRC構件總環節從制作到安裝各有差異，如果是自己做的話需要購買工具和模板，如果是只用一次這樣一來就浪費了，如果是廠商那建議購買相關工具，如果是從廠商購買使GRC構件變貴的因素有人工、運費等。廠商則是在材料上需要耗費比較多。您有需求歡迎來我們網站
http://1111tk.cn進行咨詢！
The total price of GRC components varies from manufacturing to installation. If you do it yourself, you need to buy tools and templates. If you only use it once, it will be wasted. If you buy it from the manufacturer, you should buy relevant tools. If you buy it from the manufacturer, the factors that make GRC components more expensive include labor, freight, etc. Manufacturers need to spend more on materials. Welcome to our website if you need http://1111tk.cn Consult!
