GRC外墻裝飾構件用于建筑物上須進行設計，對于新建建筑包括在建筑設計與結構設計中，對于舊建筑裝飾改造工程，須進行專項的建筑與結構設計，嚴禁僅依據立面效果圖施工。下面來講講更詳細的內容吧。

GRC exterior wall decorative components used in buildings must be designed. For new buildings, they must be included in architectural design and structural design. For old building decoration and reconstruction projects, special architectural and structural design must be carried out. It is strictly prohibited to construct only according to the facade effect drawing. Let's talk about more details.

構件設計包括材質配合比設計、形狀與尺寸設計、結構與構造設計、預埋件設計。GRC外墻裝飾構件的設計和應用設計須符合有關的建筑與結構的規范要求。

Component design includes material mix design, shape and size design, structure and structure design, and embedded parts design. The design and application design of GRC exterior wall decorative components must meet the requirements of relevant national building and structure specifications.

GRC材質配合比設計須根據選用的強度等級通過試驗確定GRC的水灰比、灰砂比、玻纖類型、玻纖含量與摻加方式等。GRC的強度等級以抗彎強度確定。GRC構件除保證材質的力學性能外，尚應滿足其他物理性能（如抗凍、抗?jié)B、干濕變形）和化學性能的要求。

GRC material mix design must determine the water cement ratio, cement sand ratio, glass fiber type, glass fiber content and mixing method of GRC through tests according to the selected strength grade. The strength grade of GRC is determined by bending strength. GRC components should meet the requirements of other physical properties (such as frost resistance, impermeability, dry and wet deformation) and chemical properties in addition to ensuring the mechanical properties of materials.

濟南GRC構件的形狀與尺寸設計應滿足建筑立面設計的要求、結構設計的要求，并符合制作和安裝的條件。

The shape and size design of GRC components in Jinan should meet the requirements of building facade design and structural design, and meet the conditions of production and installation.

構件結構設計須考慮自重、地震與風荷載的作用，還要考慮干濕變形與溫度變形的影響以及上述荷載與作用的組合效應。構件的厚度根據構件所受荷載與作用、構件形狀與構造（如肋與邊肋的間距）以及材質的強度等級設計確定。

The design of member structure must consider the effects of self weight, earthquake and wind loads, as well as the effects of dry and wet deformation and temperature deformation, as well as the combined effects of the above loads and actions. The thickness of the component is determined according to the load and action of the component, the shape and structure of the component (such as the spacing between ribs and side ribs) and the strength grade design of the material.

造型復雜或形狀變化大的構件要考慮斷面突變處的順滑連接，以減少應力集中的不利影響。構件的構造設計應有利于減少對變形的約束，以減少因此所產生的內力。

For components with complex shape or large shape change, the smooth connection at the sudden change of section should be considered to reduce the adverse effect of stress concentration. The structural design of members should be conducive to reducing the constraints on deformation, so as to reduce the internal force generated thereby.

檐線、腰線、窗臺線、門窗頂套類的水平方向使用的構件須設置滴水沿或滴水槽，以防止產生水痕污漬。

The components used in the horizontal direction of eave line, waist line, windowsill line and door and window top sleeve must be set with drip edges or drip tanks to prevent water stains.

GRC構件作為一種新型外墻裝飾材料具有總量小，強度高、抗凍融性好、可塑性強、裝飾造型豐富多樣的優點。您有什么使用問題可以關注我們網站http://1111tk.cn詳細咨詢了解。

GRC component, as a new type of exterior wall decoration material, has the advantages of small amount, high strength, good freeze-thaw resistance, strong plasticity and rich and diverse decorative shapes. If you have any use problems, you can follow our website http://1111tk.cn Consult in detail.